Qt Signal Slot Order

• Qt Signal Slot Ordering
• Qt Signal Slot Ordered
• Qt Signal Slot Execution Order

Example

New-style Signal and Slot Support¶ This section describes the new style of connecting signals and slots introduced in PyQt4 v4.5. One of the key features of Qt is its use of signals and slots to communicate between objects. Their use encourages the development of reusable components. A signal is emitted when something of potential interest. In this case, the signal slot connections are set automatically. In QML, you can connect and disconnect signal / slot connections using the following syntax: object1.signal.connect (object2.slot) object1.signal.disconnect (object2.slot) Signals in QML can also be connected to other signals, as is done in Qt / C.

Some times you see a signal is emitted in sender thread but connected slot doesn't called (in other words it doesn't receive signal), you have asked about it and finaly got that the connection type Qt::DirectConnection would fix it, so the problem found and everything is ok.

Suspicious Qt Signal Slot Ui transactions shall be investigated by the company and, if necessary, a suspicious transaction report will be made by the company to the competent Maltese or UK Authorities (or other appropriate authorities). If you use Qt::QueuedConnection or if sender and receiver of the signal are in different threads and the connecion is automatic 'emit signal' returns immediately and the slot is executed once control goes back to the event loop (or QCoreApplication::processEvents is called) if multiple slots are connected to the same signal, the order of slot. So you will link/connect a objects that sends a signal to a slot that receives the signal. Here is a basic GUI for a QT application that will have a button that says 'QUIT' and also a signal that is emitted once that button class clicked has happened, that links to the application (QApplication object) that has a 'quit' function that stops the program from executing.

But generaly this is bad idea to use Qt:DirectConnection until you really know what is this and there is no other way. Lets explain it more, Each thread created by Qt (including main thread and new threads created by QThread) have Event loop, the event loop is responsible for receiving signals and call aproporiate slots in its thread. Generaly executing a blocking operation inside an slot is bad practice, because it blocks the event loop of that threads so no other slots would be called.

If you block an event loop (by making very time consuming or blocking operation) you will not receive events on that thread until the event loop will be unblocked. If the blocking operation, blocks the event loop forever (such as busy while), the slots could never be called.

In this situation you may set the connection type in connect to Qt::DirectConnection, now the slots will be called even the event loop is blocked. so how this could make broke everything? In Qt::DirectConnection Slots will be called in emiter threads, and not receiver threads and it can broke data synchronizations and ran into other problems. So never use Qt::DirectConnection unless you know what are you doing. If your problem will be solved by using Qt::DirectConnection, you have to carefull and look at your code and finding out why your event loop is blocked. Its not a good idea to block the event loop and its not recomended in Qt.

Here is small example which shows the problem, as you can see the nonBlockingSlot would be called even the blockingSlot blocked event loop with while(1) which indicates bad coding

This section describes the new style of connecting signals and slotsintroduced in PyQt4 v4.5. Poker hands list in order.

One of the key features of Qt is its use of signals and slots to communicatebetween objects. Their use encourages the development of reusable components.

A signal is emitted when something of potential interest happens. A slot is aPython callable. If a signal is connected to a slot then the slot is calledwhen the signal is emitted. If a signal isn't connected then nothing happens.The code (or component) that emits the signal does not know or care if thesignal is being used.

The signal/slot mechanism has the following features.

• A signal may be connected to many slots.
• A signal may also be connected to another signal.
• Signal arguments may be any Python type.
• A slot may be connected to many signals.
• Connections may be direct (ie. synchronous) or queued (ie. asynchronous).
• Connections may be made across threads.
• Signals may be disconnected.

Unbound and Bound Signals¶

A signal (specifically an unbound signal) is an attribute of a class that is asub-class of QObject. When a signal is referenced as an attribute of aninstance of the class then PyQt4 automatically binds the instance to the signalin order to create a bound signal. This is the same mechanism that Pythonitself uses to create bound methods from class functions.

A bound signal has connect(), disconnect() and emit() methods thatimplement the associated functionality. It also has a signal attributethat is the signature of the signal that would be returned by Qt's SIGNAL()macro.

A signal may be overloaded, ie. a signal with a particular name may supportmore than one signature. A signal may be indexed with a signature in order toselect the one required. A signature is a sequence of types. A type is eithera Python type object or a string that is the name of a C++ type. The name of aC++ type is automatically normalised so that, for example, QString can beused instead of the non-normalised constQString&.

If a signal is overloaded then it will have a default that will be used if noindex is given.

When a signal is emitted then any arguments are converted to C++ types ifpossible. If an argument doesn't have a corresponding C++ type then it iswrapped in a special C++ type that allows it to be passed around Qt's meta-typesystem while ensuring that its reference count is properly maintained.

Defining New Signals with pyqtSignal()¶

PyQt4 automatically defines signals for all Qt's built-in signals. New signalscan be defined as class attributes using the pyqtSignal()factory.

Create one or more overloaded unbound signals as a class attribute.

The following example shows the definition of a number of new signals:

New signals should only be defined in sub-classes of QObject. Grosvenor casino bolton. They must bepart of the class definition and cannot be dynamically added as classattributes after the class has been defined.

New signals defined in this way will be automatically added to the class'sQMetaObject. This means that they will appear in Qt Designer and can beintrospected using the QMetaObject API.

Overloaded signals should be used with care when an argument has a Python typethat has no corresponding C++ type. PyQt4 uses the same internal C++ class torepresent such objects and so it is possible to have overloaded signals withdifferent Python signatures that are implemented with identical C++ signatureswith unexpected results. The following is an example of this:

Connecting, Disconnecting and Emitting Signals¶

Signals are connected to slots using the connect() method of a boundsignal.

Connect a signal to a slot. An exception will be raised if the connectionfailed.

Signals are disconnected from slots using the disconnect() method of abound signal.

Disconnect one or more slots from a signal. An exception will be raised ifthe slot is not connected to the signal or if the signal has no connectionsat all.

Signals are emitted from using the emit() method of a bound signal.

Emit a signal.

The following code demonstrates the definition, connection and emit of asignal without arguments:

The following code demonstrates the connection of overloaded signals:

Connecting Signals Using Keyword Arguments¶

It is also possible to connect signals by passing a slot as a keyword argumentcorresponding to the name of the signal when creating an object, or using thepyqtConfigure() method of QObject. For example the following threefragments are equivalent:

The pyqtSlot() Decorator¶

Although PyQt4 allows any Python callable to be used as a slot when connectingsignals, it is sometimes necessary to explicitly mark a Python method as beinga Qt slot and to provide a C++ signature for it. PyQt4 provides thepyqtSlot() function decorator to do this.

Decorate a Python method to create a Qt slot.

Connecting a signal to a decorated Python method also has the advantage ofreducing the amount of memory used and is slightly faster.

For example:

It is also possible to chain the decorators in order to define a Python methodseveral times with different signatures. For example:

Connecting Slots By Name¶

PyQt4 supports the QtCore.QMetaObject.connectSlotsByName() function thatis most commonly used by pyuic4 generated Python code toautomatically connect signals to slots that conform to a simple namingconvention. However, where a class has overloaded Qt signals (ie. with thesame name but with different arguments) PyQt4 needs additional information inorder to automatically connect the correct signal.

For example the QtGui.QSpinBox class has the following signals:

When the value of the spin box changes both of these signals will be emitted.If you have implemented a slot called on_spinbox_valueChanged (whichassumes that you have given the QSpinBox instance the name spinbox)then it will be connected to both variations of the signal. Therefore, whenthe user changes the value, your slot will be called twice - once with aninteger argument, and once with a unicode or QString argument.

This also happens with signals that take optional arguments. Qt implementsthis using multiple signals. For example, QtGui.QAbstractButton has thefollowing signal:

Qt implements this as the following:

The pyqtSlot() decorator can be used to specify which ofthe signals should be connected to the slot.

For example, if you were only interested in the integer variant of the signalthen your slot definition would look like the following:

If you wanted to handle both variants of the signal, but with different Pythonmethods, then your slot definitions might look like the following:

The following shows an example using a button when you are not interested inthe optional argument:

Mixing New-style and Old-style Connections¶

Qt Signal Slot Ordering

When the value of the spin box changes both of these signals will be emitted.If you have implemented a slot called on_spinbox_valueChanged (whichassumes that you have given the QSpinBox instance the name spinbox)then it will be connected to both variations of the signal. Therefore, whenthe user changes the value, your slot will be called twice - once with aninteger argument, and once with a unicode or QString argument.

This also happens with signals that take optional arguments. Qt implementsthis using multiple signals. For example, QtGui.QAbstractButton has thefollowing signal:

Qt implements this as the following:

The pyqtSlot() decorator can be used to specify which ofthe signals should be connected to the slot.

For example, if you were only interested in the integer variant of the signalthen your slot definition would look like the following:

If you wanted to handle both variants of the signal, but with different Pythonmethods, then your slot definitions might look like the following:

The following shows an example using a button when you are not interested inthe optional argument:

Mixing New-style and Old-style Connections¶

Qt Signal Slot Ordering

Qt Signal Slot Ordered

The implementation of new-style connections is slightly different to theimplementation of old-style connections. An application can freely use bothstyles subject to the restriction that any individual new-style connectionshould only be disconnected using the new style. Similarly any individualold-style connection should only be disconnected using the old style.

Qt Signal Slot Execution Order

You should also be aware that pyuic4 generates code that usesold-style connections.